The water-based textile protector (aerosol) provides effective, invisible protection for all types of textiles, including microfiber, and is suitable for both indoor and outdoor use. It preserves the fabric’s natural appearance, feel, and breathability while helping to reduce fading caused by UV exposure.

The textile cleaner is a powerful, bleach-free cleaning solution designed to remove stubborn water- and oil-based stains. It is suitable for all types of textiles and can be used both indoors and outdoors.

The foam cleaner is specially developed to clean and disinfect all types of textiles and can also be used on carpets. It effectively removes stains from coffee, red wine, soft drinks, jam, fruit, berries, and similar spills.

Together, these products ensure textiles remain clean, hygienic, protected, and well cared for over time.

Water-based textile protector (aerosol):
Naphtha (petroleum), hydrotreated heavy; benzene <0.1%; propan-2-ol.

Textile cleaner:
Water, sodium laureth sulfate, sodium metasilicate, tetrapotassium diphosphate, preservatives.

Textile cleaner:
Before use, remove loose dirt with a dry, absorbent cloth. Spray the textile cleaner directly onto the stain and work it in with a soft brush or sponge. Then completely absorb the cleaner and loosened dirt with an absorbent cloth. If necessary, gently dry and vacuum. Repeat the process for stubborn stains.

Foam cleaner:
Shake well before use. Spray the product from a distance of approximately 25 cm directly onto the stain or the area to be cleaned and massage the foam into the fabric using clean fingers, a soft, lint-free cloth, or a soft sponge. Leave to act for about 2 minutes, then wipe off with a soft cloth wrung out in clean water. For stubborn stains, allow to work for 6–8 minutes and repeat the process if necessary.

Water-based textile protector (aerosol):
Once the cleaned surface is completely dry, spray the textile protector evenly over the entire surface from a distance of approximately 25 cm until the fabric is slightly damp. It is recommended to always treat the entire area. Wipe up any spills immediately. Drying time is approximately 4 hours at room temperature, with full protective effect achieved after 24 hours. Any white residue can be removed with a slightly damp, wrung-out cloth.